ATTBLIME
When and why should I use spray powder for 3D scanning?
Which product is best for you?

The perfect scanningspray for 3D metrology – and for every day.
The newly developed vanishing 3D scanningspray AB6 is based on the optimized cyclododecane
- The original with cyclododecane
- As aerosol can for medium and large components
- As a container for small components
- Free from ethanol and adamantane
- High performance 3D Scanningspray
- Scan-Time 2 bis 6 hrs
- Residue-free sublimation after 6 to 10 hrs
- No cleaning required
- Made in Germany
Available as 400 ml aerosol can and as 1,000 ml reusable container


Cyclododecane at an unbeatable price.
The newly developed self-volatilising (sublimating) 3D scanning spray AB2 is based on the optimised raw material CYCLODECAN
- The original with cyclododecane
- For small and medium objects
- Free from ethanol and adamantane
- High performance 3D Scanningspray
- Scan-Time 1 to 2 hrs
- Residue-free sublimation after 2 to 4 hrs
- No cleaning required
- Made in Germany
Available as 400 ml aerosol can


The permanent for the 3D measurement professionals in newly developed grey.
The permanent 3D scanning spray ABP differs significantly from comparable white products due to the colour shade cooperative grey, which has been optimized for optical measurement technology
- Cooperative grey for even better contrasts
- Free of ethanol and titanium dioxide (TiO2)
- High performance 3D Scanning spray
- Very easy to remove
- Highly efficient due to optimized substances
- Based on renewable natural resources
- Made in Germany
Available as 400 ml aerosol can and as 1,000 ml reusable container


Ideal for restorers and archaeologists – and also for the very sophisticated metrologists.
The newly developed vanishing 3D scanningspray AB24 is also based on the optimized cyclododecane. It is perfectly suited for the temporary preservation of images and artefacts in archaeology
- The original with optimized cyclododecane
- Free of any solvents
- High performance 3D Scanningspray
- Scan-Time 12 bis 24 hrs
- Residue-free sublimation after 20 to 48 hrs
- No cleaning required
- Made in Germany
Available as 400 ml aerosol can


The fine one – for very small objects.
The new ATTBLIME® μScan liquid was developed by us for the precise matting of very small reflective or also transparent objects in the dental, jewellery or also electronics sector
- For precise application with integrated brush
- Free of ethanol and titanium dioxide (TiO2)
- Very easy to remove
- Highly efficient due to optimised ingredients
- Very thin layer thicknesses of up to 3µm
- Based on renewable natural resources
- Made in Germany
Available as 10ml bottle with integrated brush


Photopolymer resin for perfect 3D printing.
The new water-soluble ATTBLIME® r3sin photopolymer resin was developed by us for the high-precision creation of 3D printed models with low shrinkage, highest fineness and a very smooth surface.
- Impresses with rapid UV curing
- Optimised for LCD displays, DLP and SLA printers
- Reduced printing time due to high flowability
- Highest fineness with a very smooth surface
- Available in grey and white
- Made in Germany
Available as 1.000 ml bottle and as 5.000 ml container

SHC-System (SPRAY HEAD CHANGE SYSTEM)
The spray cans are equipped with the unique SHC system (spray-head-change-system), which allows the user to choose between vertical and horizontal, as well as wide and narrow exit angles, to control the film thicknesses and thus sublimation times.

Round spray head
Round spray pattern for high definition details. Shorter sublimation time due to a fine application.

Variable spray head (rotatable)
Request a Free Demo:
*Please provide customer email so we can have a follow-up on how the evaluation goes.
This will help us a lot.
Get started by sending us some basic information
Fill out the form below and we’ll get back to you shortly.